REALITY

6" LED Module

For use with common 6” installed housings for retrofit applications:

New Construction use with housings L7X, LC6, or L7XLED T24 (dedicated LED connector). Remodel or install from below applications use with L7XR or L7XRLED T24 (dedicated LED connector). LED module for use in retrofit / remodel or new construction applications where energy savings, long-life, and functional delivered light levels are required. The Reality LED module provides 80% energy savings over the 65W BR30 and replicates the beam pattern and useful light levels of these fixtures. It will maintain at least 70% light output for 50,000 hours in a typical lC environment. The Reality LED module is the most economical means to create a well-lit environment with exceptional energy efficiency and near zero maintenance.

Construction

Rugged, one-piece, die-cast heat sink design for optimal thermal management. Wet location rated lens is tightly fitted to the housing to reduce the ingress of dust. Hardwire kit ships standard to enable a permanent conversion to a LED source and Title 24 compliant. Twin torsion springs ensure easy installation.

Optics

Elliptical upper reflector and a patented micro prism lens provides a 38 degree or 67 degree full width half max (FWHM) beam angle based on distribution chosen. Lower splay recesses optical system into the ceiling to prevent glare and provide a traditional look.

Electrical

LEDs on a metal core circuit board, ensure cool-running operation for long life. On-board circuitry to ensure protection against wiring errors.

High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a standard Edison (E26) base socket. Full range dimming is standard; dimming down to 25%. Optimal dimming performance is achieved when connected to an electronic low-voltage (ELV) dimmer; Input wattage for 600L is 8W, 80 lumens per watt. Input wattage for 1000L is 11W, 89 lumens per watt. Actual wattage may differ by +/-5% when operating at 120V +/-10%.

Installation

Suitable for installation in standard-height rough-in sections. Fits into most popular 6” housings.   CSA listed for installation in any can with minimum 6-1/8” inside diameter X 7-1/32” inside height.

Available with a dedicated rough-in section for new construction.  Use the L7X, L7XR, or LC6 Lithonia rough-in with the REALITY LED module.

Specifications
Product overview and specifications
Aperture Size 6 IN
Brand Name Lithonia Lighting
Color Black, Bronze, Clear, Nickel, Wheat, White
Correlated Color Temperature 2700 K, 3000 K, 3500 K, 4000 K
Environment Indoor
Finish Antique, Brushed, Diffuse, Gloss, Matte, Oil Rubbed, Specular
Light Source LED
Listings CA Title 24, CSA Wet Location, cUL, ENERGY STAR®, IC, Non-IC, UL, UL Wet Location
Lumen Output 1000 LM, 600 LM, 650 LM, 720 LM
Mounting Type Recessed
Product Type Downlight
Series REAL6
Shape Round
Trim Style Open
Voltage Rating 120
Spec Sheets
A summary of the performance and other technical characteristics of the product.
File Type Document Title View
L7XLED-T24_pdf View
L7XRLED-T24_pdf View
LC6LED-T24_pdf View
REALITY-6-LED-ESL_pdf View
Technical Files
Installation documents, building information models, etc.
File Type Document Title View
REALITY_Installation_Instructions_pdf View
REALITY-Installation-Instructions_pdf View
File Type Document Title View
REALITY-Replacement-Parts_pdf View
Resources
This is the Section Header component
File Type Document Title View
REALITY_Brochure_pdf View
REALITY_FAQs_pdf View